Shopping Cart

GE65 Direct Oil Fired Heater (Dual Voltage)

  • Availability: In Stock
  • Product Code: GE65
  • £873.00

    All Prices Exclude Vat.

Prices displayed in Euros are for reference purposes only we can only accept payments in Pound Sterling on the website.

For purchases in Euros please contact our office on +441773 863999.


The GE65 Direct Fired Oil Heater has an output of 69kW (235,000 BTUs / Hr), and is available with a range of optional accessories, to include fuel gauge, fuel tank filter and a pneumatic wheel kit.

The unit has a metal tank which is capable of supporting approximately 12 hours of continuous operation from a full tank of fuel; the fuel lines are a hydrocarbon resistant rubber with a reinforced metal sheath.

The automatic ignition process is supported by a Suntec fuel pump, ensuring a consistently high quality of operation; this is backed up by an electronic flame control device and a safety thermostat, together with a post ventilation process for added protection of the AISI 430 Combustion Chamber.

The GE65 can be used as either a manual heater, with the switch to position (I), or in automatic with the switch set to position (II) and a Heavy Duty Thermostat (02AC582) fitted. The Heavy Duty Thermostat has a temperature range of -5/+50°C and is supplied complete with a 10m cable.

As with all direct fired heaters, the GE65 should only be used in a well ventilated area; typical uses for the GE65 include horticulture / agriculture, construction, and the heating of workshops, foundries, etc.

Where longer-term use is required, the GE65 can be converted to work from a single-pipe system and a tigerloop; the unit is then usually connected to a bulk fuel tank or similar IBC. 

Upon receipt of your heater you will receive an e-mail with a link to your warranty registration form; upon submission, and subject to your heater having been serviced in line with Arcotherm Terms and Conditions, the GE65 will carry a 3-Year "Big Five" Warranty. Please read the Arcotherm Ts & Cs on our website for further information.

For further information regarding the GE65, or other products in the Arcotherm range, please do not hesitate to contact a member of the Arcotherm sales team.

Heater Dimensions 1200mm x 555mm x 860mm
Packaged Heater Dimensions 1200mm x 480mm x 892mm
Product Weight 58 Kg
Packaged Weight 66 Kg
Heating Capacity 69 kW
Heat Efficiency 100 %
Air Flow 2,500 m³/h
Air Temperature 120 °C
Fuel Consumption 5.48 l/hr
Tank Capacity 65 Litres
Electrical Power 598 Watts

Write a review

Please login or register to review