Jumbo 150M Indirect Oil Fired Heater - 151Kw (230v)
The Jumbo 150M Indirect Oil Fired Heater produces an output of 151kW (518,000 BTUs / Hr); however the success of the Jumbos is also based around air movement which, in the case of the Jumbo 150M, is an impressive 10,500 m³ / Hr.
The combination of air movement and heat output outlined in the opening paragraph, makes the Jumbo ideal for heating large, temporary structures, glasshouses, construction and for remediation and grain drying.
Prior to the fan becoming operational, the Ecoflam burner pre-heats the combustion chamber; when the internal thermostat is activated, the fan motor disperses the heat into the structure, and will continue doing so until Heavy Duty Thermostat (02AC582) reaches the temperature set by the end user.
The combustion process is governed by an electronic control box, with a flame control sensor, and safety thermostat also in line; the AISI 430 Stainless Steel Combustion Chmaber is also protected by a post-ventilation cooling process, to prevent the chamber contracting too quickly.
In most cases the Jumbo would be used in conjunction with a bunded fuel tank or an IBC (Intermediary Bulk Container); this is done with use of single-pipe system and a tigerloop air separator. The tigerloop is designed to negate the need for "bleeding" the system of air in the event that the customer runs the tank out of fuel.
Upon receipt of your heater you will receive an e-mail with a link to your warranty registration form; upon submission, and subject to your heater having been serviced in line with Arcotherm Terms and Conditions, the Jumbo 150M will carry a 3-Year "Big Five" Warranty. Please read the Arcotherm Ts & Cs on our website for further information.
For further information regarding the Jumbo 150M, or other products in the Arcotherm range, please do not hesitate to contact a member of the Arcotherm sales team.
|1945mm x 905mm x 1330mm|
|Packaged Heater Dimensions|
|1990mm x 715mm x 1280mm|
|N / A|