GE65 Direct Oil Fired Heater - 69Kw (Dual Voltage)
The GE65 Direct Fired Oil Heater has an output of 69kW (235,000 BTUs / Hr), and is available with a range of optional accessories, to include fuel gauge, fuel tank filter and a pneumatic wheel kit.
The unit has a metal tank which is capable of supporting approximately 12 hours of continuous operation from a full tank of fuel; the fuel lines are a hydrocarbon resistant rubber with a reinforced metal sheath.
The automatic ignition process is supported by a Suntec fuel pump, ensuring a consistently high quality of operation; this is backed up by an electronic flame control device and a safety thermostat, together with a post ventilation process for added protection of the AISI 430 Combustion Chamber.
The GE65 can be used as either a manual heater, with the switch to position (I), or in automatic with the switch set to position (II) and a Heavy Duty Thermostat (02AC582) fitted. The Heavy Duty Thermostat has a temperature range of -5/+50°C and is supplied complete with a 10m cable.
As with all direct fired heaters, the GE65 should only be used in a well ventilated area; typical uses for the GE65 include horticulture / agriculture, construction, and the heating of workshops, foundries, etc.
Where longer-term use is required, the GE65 can be converted to work from a single-pipe system and a tigerloop; the unit is then usually connected to a bulk fuel tank or similar IBC.
Upon receipt of your heater you will receive an e-mail with a link to your warranty registration form; upon submission, and subject to your heater having been serviced in line with Arcotherm Terms and Conditions, the GE65 will carry a 3-Year "Big Five" Warranty. Please read the Arcotherm Ts & Cs on our website for further information.
For further information regarding the GE65, or other products in the Arcotherm range, please do not hesitate to contact a member of the Arcotherm sales team.
|1200mm x 555mm x 860mm|
|Packaged Heater Dimensions|
|1200mm x 480mm x 892mm|